Your Price: $12.89

We carry the full line of Bugpack items. Many are in stock, the rest can be ordered for quick delivery 

These boots are molded from high grade copolymer vinyl that better withstands temperature extremes. Included with each pair of boots are high quality stainless steel screws, washers and locknuts. Also available in black, blue and yellow.

BP5049-13          Trick Axel Boots—Red, Pr.

Your Price: $13.79

Transaxel mount made of top quality urethane with steel sleeves and grade 5 hardware.

BP6519-10            Urethane Front Mount 61-72  T-1

Your Price: $28.99

These new urethane a-arm bushings prevent vertical motion at the pivot point which is greatly magnified at the end of the arm, altering alignment. Includes four bushings and two steel sleeves, with instructions.

BP6557              Rear IRS A-Arm Bushings With Sleeve Kit

Your Price: $35.99

High performance urethane improves handling due to reduction in the flex. One kit does the whole car.

BP6524-32       Front Control Arm & Sway Bar bushing Kit, Super 74-79

Your Price: $17.99

High performance urethane improves handling due to reduction in the flex.

BP6524-30          Front Control Arm Bushing Kit, Superbeetle 71-79

Your Price: $17.99

An inexpensive suspension upgrade that looks sharp and will outperform stock parts.

BP6523-10              Urethane Front End Seals, Linkpin, 4 Pcs

Text Box: Bugpack

To contact us call:

1-800-344-2847

BP6519                  Urethane Transaxel Mount Kit, 61-72 T-1

Transaxel mount made of top quality urethane with steel sleeves and grade 5 hardware.

Your Price: $25.99

BP6587-13           Flanged Grommets, 2-1/4” O.D. x 1-7/8” I.D.

Rear spring plate grommets designed not to crunch an “bottom out”. Specially formatted to resist frequent replacement. Used in custom made torsion housings.

Your Price: $13.79

BP6588-12             Round Type Grommets, 1-7/8” I.D. IRS

Rear spring plate grommets designed not to crunch an “bottom out”. Specially formatted to resist frequent replacement. Used in custom made torsion housings.

Your Price: $14.69

BP6588-10            Round Type Grommets, 1-3/4” I.D.

Rear spring plate grommets designed not to crunch an “bottom out”. Specially formatted to resist frequent replacement. Used in custom made torsion housings.

Your Price: $14.69

BP6587-16                          Flange Only Grommet 1-7/8” x .187

Specially formatted to resist frequent replacement. Used in custom made torsion housings.

Your Price: $13.69

BP6524-21                     Bushing Kit, In/Out, Ball Joint (6 PC Kit)

These In/Out urethane bushings wear like “iron”. They are long one piece units designed to replace both inner and outer with one bushing at the same time giving greater surface to the trailing arm.

Your Price: $35.99

BP6586-14                           Urethane Front Snubbers, Black

Super tough urethane snubbers resist splitting. Set of two. Fits Type 1 to ‘65 and Type II to ‘67.

Your Price: $13.69

BP6586                           Urethane Front Snubbers, Red

Super tough urethane snubbers resist splitting. Set of two. Fits Type 1 to ‘65 and Type II to ‘67.

Your Price: $13.69

.

BP6501-011                           Replacement Hardware for T-1 Sway Bar, 3/4”                   rear 68 &Later IRS

Replaces hardware from BP6501-11 Sway Bar Kit

Your Price: $48.50

BP5047-12                                 Urethane Axel Covers Set, Blue

These colorful axel covers help prevent “nicks” in the IRS axel. These kits are easy to install by simply snapping over and closing around axel. Includes 10 pieces. This blue set is the only one available. Other sets are in red.

NLA                   

BP6561                           Chrome Dust Caps, Without Holes, Pair

Custom Chrome finish tops off this custom wheel accessory.

Your Price: $9.99

Note:  The Racer price is the suggested Bugpack discounted price from List.  Our price to internet buyers is approx. 10% less than the Racer price.

 

This page is just a sample of the many Bugpack parts that we have available.  Call us at 800-344-2847 to get the part you need.

 

We have been in business for 38 years so if you have a repair question, give us a call.  We are glad to share our knowledge of Air-cooled VW’s.

BP5035-10/BP5035-15      HD Cross Shaft Kit, 61-70 or 73 & Later

Shaft arms are tig welded for optimum strength. Complete with new housing bushing and H.D. throw out bearing retaining clips. Highly recommended for use with 1500 lb or more pressure plates.

Your Price: $29.99

BP6500-51                                        Sway Bar clamp Kit, Balljoint

Also available for linkpin sway bars.

Your Price: $32.99

BP6555                      Rear Shock Mounts, Pair

This kit allows for up to four additional shock absorbers on the rear suspension. It will be necessary to fabricate the upper shock mount.

Your Price: $33.99

BP6575                 IRS Shock Mount Kit

This kit allows for up to six additional shock absorbers on the rear suspension. It will be necessary to fabricate the upper shock mount. Requires welding to install.

Your Price: $47.99

BP6566-11                 Chrome Spring Plate Retainers

No longer available from Bugpack so order before they disappear.

NLA                   

BP5027                      Steel Axel Tube Retainers, 2 piece design, Pair

Precision machined to eliminate leaky gaskets and o-rings. They add tremendous strength in retaining axels in off-road running. Fits all swingaxel transmissions.

Your Price: $63.99

BP5519-16                      IRS Conversion Clips Only For Stock Housing, Pair

Custom torsion housing for Fugitive chassis’. Precision jig fabricated. Upper weld-on shock bosses and lower stops are also available separately.

Your Price: $62.99

BP6560-11                      IRS Chrome Torsion Cap, Pair

Custom torsion housing for Fugitive chassis’. Precision jig fabricated. Upper weld-on shock bosses and lower stops are also available separately.

Your Price: $23.99

Click the Bugpack logo to link to the Bugpack website